MS-105 MASS-STREAM 50 ln/min
- Proven direct inline CTA sensor (no bypass)
- Excellent repeatability
- Compact, rugged design (IP65, dust and waterproof)
- Very low pressure drop
- Less sensitivity to humidity or dirt
- With integrated multi-functional TFT display
Multiple gases
Multiple outputs
Pre-installed gases
| Gases | max. range |
|---|---|
| Air, N2 | 50 ln/min (= 50 SLM) |
| O2 | 48 ln/min (= 48 SLM) |
| Ar | 100 ln/min (= 100 SLM) |
| CH4 | 30 ln/min (= 30 SLM) |
| CO2 | 54 ln/min (= 54 SLM) |
With free software Bronkhorst FlowSuite you can add one of the 34 available gases or create mixtures on to the instrument.
This way you have a multi fluid instrument for your application
The instrument can be easily hooked up to a PC by using additional cables.
Read here how to hookup the MASS-STREAM to the PC.
Features of MS-105 MASS-STREAM 50 ln/min
- Direct inline measurement principle
- Usable for virtually every kind of gas or gas-mix
- Mass flow measurement wide scope of applications
- Good response times
- Including calibration certificate
- Low sensitivity to dirt and humidity
- Compact and robust design
- Measurement without moving parts
- Connect the instrument to a PLC (programmable logic controller), PAC (programmable automation controllers) or DAQ (data acquisition system) with our loose end cable 7.03.191
- Modern multi-functional TFT display
- IP65 compliant
- Operator buttons on the instrument
- Customized adjustable multi-functional display: actual flow, totaliser with memory and reset,
alarm, setup and much more
Technical specifications
Measurement / control system
Flow range
up to 50 ln/min Air
Accuracy
± 1,0 % RD plus ± 0.5% FS (at calibration conditions)
(incl. factory calibration certificate on Air)
(incl. factory calibration certificate on Air)
Repeatability
< 0,2 % FS
Turndown ratio
1:50
Operating pressure
up to 10 bar (g)
Pre-installed gases
Air, N2, O2, Ar, CH4, CO2 + FLUIDAT Onboard
Standard calibration gas
Air, other gases are converted using our FLUIDAT Onboard model which will introduce small inaccuracy
Response time (sensor)
approx. 0,9 sec.
Operating temperature
0 … 50 °C
Leak integrity, outboard
tested < 2 x 10-8 mbar l/s He
Attitude sensitivity
at 90° deviation from horizontal max. error 0,2 % at 1 bar typical N2
Pressure sensitivity
±0,3% Rd/bar typical (Air)
Temperature Sensitivity
±0,1% Rd/°C (Air)
Mechanical parts
Material (wetted parts)
Instrument body: Aluminium EN AW-6082-T6 Sieves, rings and sensor: Stainless steel SS 316
Process connections
BSPP female thread G1/4" (ISO1179-1)
Seals
FKM
Ingress protection
IP65
Storage / transport conditions
0 … 50 °C, max. 95% RH (non condensant)
Electrical properties
Power supply
+15 … 24 Vdc ±10%
Analog output
4…20 mA (sourcing output)
EMC
CE / RoHS
Digital Communication
RS232
Electrical connection
8 DIN (male)
Product details
Downloads
Applications
- Calibration of air samplers
- Process gas measurement in food industry, chemical and petrochemical industries, in fermentation installations and in biotechnology
- 3D printing of metal products
- Gas consumption measurement for internal accounting
- Methane production in anaerobic digesters
- Oxygen supply in beer brewing process
- Surface treatment
- Test benches
- Aeration of liquids or substances
- Ratio control in burner & furnace applications
- And much more