MASS-STREAM Thermal Mass Flow Meter for Gases
MASS-STREAM mass flow meters for gases are based on the thermal through-flow measurement principle.
Covering a wide measurement range, from 0.5...50 ln/min up to 10...1000 ln/min Air equivalent.
Each Mass Flow Meter is equipped with exciting features, like our multi-functional on-board display for indicating actual flow, totalized flow, and alarms.
All 4 models, shown in the table below, have 6 pre-installed gases: Air, N2, O2, Ar, CH4, CO2;
analog 4-20mA output signals and Digital RS-232 communication.
With Bronkhorst's FLUIDAT Onboard it is possible to select other gases or mixtures via our free software Bronkhorst FlowSuite.
Max. capacities in ln/min (SLM) per model for various gases | Air | N2 | O2 | Ar | CH4 | CO2 |
---|---|---|---|---|---|---|
50 | 50 | 48 | 100 | 30 | 54 | |
MS-106 | 200 | 200 | 200 | 400 | 120 | 215 |
MS-108 | 500 | 500 | 500 | 1000 | 300 | 545 |
MS-109 | 1000 | 1000 | 1200 | 1200 | 600 | 1090 |
MASS-STREAM THERMAL MASS FLOW METER FOR GASES
The thermal Mass Stream Bronkhorst® mass flow meters for gases based on direct through-flow measurement are produced in Germany since 1997.
The MASS-STREAM™ series D-6400 works following the constant temperature anemometer principle. Our MASS-STREAM™ instruments cover a wide range of measurement and control applications in almost every industry sector - like mechanical engineering and process industry, gas production, food and beverage industry as well as environmental engineering and the chemical industry.
- The MASS-STREAM thermal mass flow meter series operate on the principle of direct thermal mass flow measurement (no by-pass); rather than measuring the volume flow it measures the actual mass flow, without the need of temperature and pressure correction.
- The modern multi-coloured TFT display provides an multi-functional display: actual flow, fluid sets, totalizer with memory and reset, alarm, setup and more.
- With Bronkhorst’s FLUIDAT Onboard it is possible to select other gases or mixtures via our free software Bronkhorst FlowSuite
- These models have 6 pre-installed gases on board that can be set via the onboard display; Air, Nitrogen(N2), Oxygen(O2), Argon(Ar), Methane(CH4), Carbon dioxide(CO2)
- The digital thermal gas mass flow meters are standard equipped with 4…20 mA and RS-232 output signals.
- The highly accurate FLUIDAT gas database ensures best in class conversion from Air to the customer gas. Additionally, the on-board gas database is used for real-time corrections of the flow measurement based on the actual process temperature.