MVM-040-PN Magnetic Flow Meter
The MVM-040-PN is substituted by the
MVM-060-PN which has an optimized/improved flow range.
MVM-040-PN
Low-Flow Magnetic Inductive Flow meters for water-like liquids
- Compact, weatherproof (IP65) design
- No moving parts (no mechanical wear)
- Interference free operation
- Independence to inlet/outlet pipework
- Fast response
- Free pipe cross section: low ΔP, insensitive to contamination
The MVM-040-PN is substituted by the
MVM-060-PN which has an optimized/improved flow range.
Wasserähnliche Flüssigkeiten
Pulse output
Flow ranges
This magnetic flow meter is suitable to measure flows of water and other conductive liquids within a flow range of 2 .. 40 lpm.
| Model | Min | Max | output signal starts |
|---|---|---|---|
| MVM-040-PN | 2 l/min | 40 l/min | ~ 1 l/min |
Scope of delivery
- Magnetic Flow Meter
- Calibration certificate
- Packing box
- MAG-VIEW Manual
- (optional) instrument cable
Eigenschaften von MVM-040-PN Magnetic Flow Meter
- Makes liquid flows visible by
- Pulse output
- Blinking LED (red/green)
- No mechanical wear
- No moving parts
- Ease of mounting and operation
- Mounting in any position
- Free pipe cross section
- No additional pressure drop
- Fast response (<500 ms)
- Insensitive with contaminated liquids
- Ideal solution for interference free operation combined with a long-life cycle
- Can be used in areas where flow sensors with moving parts cannot be applied
- Wide independence to the inlet and outlet pipe creates the advantage to be able to install in compact machines with cramped confines
Technische Spezifikationen
Mess- / Regelungssystem
Durchflussbereich
2..
40
l/min
Genauigkeit
±2% RD
Wiederholgenauigkeit
1%
Druckstufe
PN16
Nennweite
DN 10
Durchfluss- / Alarmanzeige
Grüne LED: Durchflussproportionales Blinken
Signaloutput ab
~
1
l/min
Medium
Wasser und andere leitfähige Flüssigkeiten
(minimale Leitfähigkeit von 50 μS/cm)
(minimale Leitfähigkeit von 50 μS/cm)
Mediumtemperatur
± -15.. 80 °C (nicht einfrierend)
Bereich
1:20
Reaktionszeit (Sensor)
< 500 ms
Mechanische Teile
Material (benetzte Teile)
Gehäuse: Aluminium-Druckguss
Elektroden: Edelstahl 1.4571
Prozessanschlüsse: Edelstahl 1.4571
Messrohr: PEEK Victrex 450GL30
Dichtung: EPDM
Elektroden: Edelstahl 1.4571
Prozessanschlüsse: Edelstahl 1.4571
Messrohr: PEEK Victrex 450GL30
Dichtung: EPDM
Prozessanschlüsse
G1/2'' BSP Außengewinde
Schutzklasse
IP65
Elektrische Eigenschaften
Stromversorgung
24
Vdc
±10%
Max. Leistungsaufnahme
max. 80 mA
Elektrische Schutzmaßnahmen
short-circuit proof (up to 30V)
polarity protection (up to -30V)
polarity protection (up to -30V)
Frequenzausgang
Impulsrate / K-Faktor: 855 Impulse/l
Auflösung: 1,2 ml/Impuls
Signalform: Push-Pull
Auflösung: 1,2 ml/Impuls
Signalform: Push-Pull
Signalform
Rechteckiges Signal, Impulstastverhältnis 50:50, Push-Pull
Signalstrom
max. 20 mA, current limited
Pin-Belegung
PIN 1: +UB
PIN 2: -
PIN 3: GND
PIN 4: Frequenzausgang
PIN 5: nicht anschließen
PIN 2: -
PIN 3: GND
PIN 4: Frequenzausgang
PIN 5: nicht anschließen
Elektrischer Anschluss
5-pin-plug M12x1
Product details
Downloads
Declaration of Conformity
Anwendungen
The fields of application for this magnetic flow meter are diverse:
- Can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media
- Sensor is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum of 50µS/cm
- Water distribution
- Chemical feed
Häufig gestellte Fragen
More questions on our FAQ page